Q. E-mail function fails
 
A. Check if e-mail setting is correct.

        DVR program -> environment set-up ->sensor/ alarm -> e-mail alarm-> e-mail set-up .
 

     Check if e–email sending set-up is done for when events(motion, sensor, picture error) happen;
 
        DVR program -> environment set-up ->camera/motion -> image of motion detection event -> e-mail sending set-up
 
 

server address

Set up the address of mail server(SMTP). ex) smtp.mail.yahoo.co.kr
((if SMTP server is installed in DVR, input 127.0.0.1)

user ID

If a mail server needs an authorization, input user ID.
ex) master (if SMTP server is installed in DVR, do not use)

password

If a mail server needs an authorization, input user password.
ex) ******** (if SMTP server is installed in DVR, do not use)

senderE-mail

Input sender’s e-mail address.Ex) dvrsyst@dvr.com

receiverE-mail

Input receiver’s e-mail address. Multiple receivers can be input using semi-colon(;).
Ex) master@yahoo.co.kr; camsupervisor@naver.com

transmission interval

Set up transmission interval of repetitive event by second.

 
  
  [Wariness!]

      If you use DVR SMTP server as e-mail server, some addresses may not work (hanmail.net, paran.com, empas.com … )
 
      because if an unauthorized IP is used, a mail can be classified as spam and cancelled. 
 
      As DVR SMTP server is not supported, with Wndows95, 98(se), ME, different mail account should be used.